會員中心 | English | 繁體中文

圓形卸扣加大型 GB 559 (OE) - 1987

選擇規格尺寸點擊↓

尺寸單位: mm

國標GB 559 (OE) - 1987 GB559 559GB 圓形卸扣加大型

在線制圖

掃一掃分享

公差公制螺紋極限尺寸米/英制螺紋對照

千件重及價格計算千件重 : kg x 元/kg = 元/千件

默認密度 g/cm³

序號

許用負荷,KN(tf)
B	最小值=公稱
	最大值
H	最小值=公稱
	最大值
R₁	最小值=公稱
	最大值
d₁	公稱
	最小值
	最大值
d₂
D
d
R
C	O1、O3、O4型
	O2型
單重≈kg

3.92(0.40)	4.90(0.50)	6.27(0.64)	7.84(0.80)	9.80(1.00)	12.25(1.25)	15.68(1.60)	19.60(2.00)	24.50(2.50)	31.36(3.20)
18	20	23	25	28	32	36	40	45	51
18.9	21	24.1	26.2	29.4	33.6	37.8	42	47.3	53.6
50.5	56	64.5	70	79.5	88.5	101	112.5	126.5	141.5
53	58.8	67.7	73.5	83.5	92.9	106.1	118.1	132.8	148.6
15	17	19	21.5	24	27	30.5	34	38	43
15.8	17.9	20	22.6	25.2	28.4	32	35.7	39.9	45.2
11	12	14	15	17	19	22	25	28	31
11.5	12.5	14.5	15.5	17.5	19.5	22.5	25.5	28.5	31.5
12	13	15	16	18	20	23.5	26.5	29.5	32.5
M10	M12	M14	M14	M16	M18	M22	M24	M27	M30
22	24	28	30	34	38	44	50	56	62
10	11	13	14	16	18	20	23	25	29
10	11	13	14	16	18	20	23	25	29
1.5	1.5	1.5	1.5	1.5	2	2	2	2	2
1.7	1.8	2.1	2.3	2.6	2.9	3.3	3.8	4.2	4.7
0.101	0.127	0.185	0.235	0.304	0.431	0.625	1.22	1.44	1.87

序號

許用負荷,KN(tf)
B	最小值=公稱
	最大值
H	最小值=公稱
	最大值
R₁	最小值=公稱
	最大值
d₁	公稱
	最小值
	最大值
d₂
D
d
R
C	O1、O3、O4型
	O2型
單重≈kg

39.20(4.00)	49.00(5.00)	61.74(6.30)	78.40(8.0)	98.00(10.00)	122.50(12.50)	156.80(16.00)	196.00(20.00)	245.00(25.00)
57	63	71	80	90	100	113	126	142
59.9	66.2	74.6	84	94.5	105	118.7	132.3	149.1
159.5	177.5	200	224.5	251.5	281	318	355	397.5
167.5	186.4	210	235.7	264.1	295.1	333.9	372.8	417.4
48	54	60	68	76	85	96	107.5	120
50.4	56.7	63	71.4	79.8	89.3	100.8	112.9	126
35	39	44	49	55	62	70	78	87
35.5	39.5	44.5	49.5	55.5	62.5	70.5	78.5	87.5
36.5	40.5	45.5	51	57	64	72	80	89
M33	M36	M42	M48	M52	M60	M68	M76	M85
70	78	88	98	110	124	140	150	174
32	36	40	45	50	56	64	71	79
32	36	40	45	50	56	64	71	79
2.5	2.5	2.5	2.5	2.5	3	3	3	3
5.3	5.9	6.6	7.4	8.3	9.3	10.5	11.7	13.1
2.65	3.68	4.98	7.03	10.28	12.35	19.67	27.95	37.35

同版本產品組

GB 559 (OE1-OE4) - 1987

引用參考

GB /T 3098.25 - 2020

緊固件機械性能不銹鋼和鎳合金緊固件選用指南

GB /T 13914 - 2013

沖壓件尺寸公差

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息

1	[國標] GB /T 25854 (Dee) - 2010	一般起重用 - D形卸扣 Forged Shackles for General Lifting Purposes - Dee Shackles 供應商(1)
2	[國標] GB 24814 - 2009	起重用短環鏈吊鏈等用4級普通精度鏈 Short Link Chain for Lifting Purposes - Grade 4, Non-calibrated, for Chain Slings Etc. 供應商(1)
3	[國標] GB /T 5974.1 - 2006	鋼絲繩用普通套環 General Purpose Thimbles for use with Steel Wire Ropes 供應商(1)
4	[國標] GB /T 8918 - 2006	重要用途鋼絲繩 Steel Wire Ropes for iImportant Purposes 供應商(2)
5	[國標] GB /T 5975 (HY/HYS) - 2026	起重機械鋼絲繩用壓板 - 圓弧形壓板 Lifting appliances - Clamping plates for fixing steel wire ropes, Type HY，HYS
6	[國標] GB /T 5975 (TY) - 2026	起重機械鋼絲繩用壓板 - 梯形壓板 Lifting appliances - Clamping plates for fixing steel wire ropes, Type TY
7	[國標] GB /T 5975 (DY) - 2026	起重機械鋼絲繩用壓板 - 單繩壓板 Lifting appliances - Clamping plates for fixing steel wire ropes, Type DY
8	[國標] GB /T 17116.3 - 2018	短型螺旋扣
9	[國標] GB /T 17116.3 - 2018	長型螺旋扣
10	[國標] GB /T 17116.3 - 2018	拉撐桿
11	[國標] GB /T 17116.3 - 2018	銷座
12	[國標] GB /T 17116.3 - 2018	焊接倒U型吊板
13	[國標] GB /T 17116.3 - 2018	栓接倒U型吊板
14	[國標] GB 24813 - 2018	帶安全閉鎖裝置的8級鋼制鍛造起重吊鉤 Forged Steel Lifting Hooks with Latch, Grade 8
15	[國標] GB /T 10051.5 - 2010	起重吊鉤 - 不帶凸耳的直柄單鉤 LM型和LY型 Lifting Hooks - Shank Hooks with Point - Type LM and LY
16	[國標] GB /T 10051.5 - 2010	起重吊鉤 - 帶凸耳的直柄單鉤 LMD型和LYD型 Lifting Hooks - Shank Hooks with Point - Type LMD and LYD
17	[國標] GB /T 25854 (Bow) - 2010	一般起重用 - 弓形卸扣 Forged Shackles for General Lifting Purposes - Bow Shackle
18	[國標] GB /T 5976 - 2006	鋼絲繩夾 Wire Rope Grips
19	[國標] GB /T 547 (A) - 1994	直型錨卸扣 Anchor Shackle
20	[國標] GB /T 547 (B) - 1994	馬蹄形錨卸扣 Anchor Shackle-U-shaped
21	[國標] GB /T 10603 (Dee) - 1989	一般起重用鍛造卸扣 - D形卸扣 Forged Shackles for General Lifting Purposes - Dee Shackles
22	[國標] GB /T 10603 (Bow) - 1989	一般起重用 - 弓形卸扣 Forged Shackles for General Lifting Purposes - Bow Shackle
23	[國標] GB 10051.5 - 1988	起重吊鉤 - 不帶凸耳的直柄單鉤 LM型和LY型 Lifting Hooks - Shank Hooks with Point - Type LM and LY
24	[國標] GB 10051.5 - 1988	起重吊鉤 - 帶凸耳的直柄單鉤 LMD型和LYD型 Lifting Hooks - Shank Hooks with Point - Type LMD and LYD
25	[國標] GB 559 (D1-D4) - 1987	船用卸扣 - 直形卸扣系列 Shackles for Ship - Straight
26	[國標] GB 559 (D) - 1987	直形卸扣 Straight Shackle
27	[國標] GB 559 (O1-O4) - 1987	船用卸扣 - 圓形卸扣系列 Shackles for Ship - Circular
28	[國標] GB 559 (O) - 1987	圓形卸扣 Circular Shackle
29	[國標] GB 559 (OE1-OE4) - 1987	船用卸扣 - 圓形卸扣加大系列 Shackles for Ship - Circular - Large
30	[國標] GB 559 (D1) - 1987	凸肩橫銷適用直形卸扣 Screwed Pin with Eye and Collar - For Straight Shackle
31	[國標] GB 559 (O1) - 1987	凸肩橫銷適用圓形卸扣 Screwed Pin with Eye and Collar - For Circular Shackle
32	[國標] GB 559 (OE1) - 1987	凸肩橫銷適用加大型圓形卸扣 Screwed Pin with Eye and Collar - For Large-size Circular Shackle
33	[國標] GB 559 (D2) - 1987	沉頭橫銷適用直形卸扣 Slotted Countersunk Head Pins - For Straight Shackle
34	[國標] GB 559 (O2) - 1987	沉頭橫銷適用圓形卸扣 Slotted Countersunk Head Pins - For Circular Shackle
35	[國標] GB 559 (OE2) - 1987	沉頭橫銷適用加大型圓形卸扣 Slotted Countersunk Head Pins - For Large-size Circular Shackle
36	[國標] GB 559 (D3) - 1987	螺栓銷適用直形卸扣 Bolt-Type Pin with Hexagon Head - For Straight Shackle
37	[國標] GB 559 (O3) - 1987	螺栓銷適用圓形卸扣 Bolt-Type Pin with Hexagon Head - For Circular Shackle
38	[國標] GB 559 (OE3) - 1987	螺栓銷適用加大型圓形卸扣 Bolt-Type Pin with Hexagon Head - For Large-size Circular Shackle
39	[國標] GB 559 (D4) - 1987	圓柱銷適用直形卸扣 Parallel Pins - For Straight Shackle
40	[國標] GB 559 (O4) - 1987	圓柱銷適用圓形卸扣 Parallel Pins - For Circular Shackle
41	[國標] GB 559 (OE4) - 1987	圓柱銷適用加大型圓形卸扣 Parallel Pins - For Large-size Circular Shackle
42	[國標] GB 559 (Nuts) - 1987	六角螺母 Hexagon Nuts
43	[德標] DIN 1478 - 2005	鋼管材或鋼棒材制套筒螺母 Turnbuckles Made from Steel Tubes or Round Steel Bars 供應商(1)
44	[德標] DIN 1480 - 2005	模鍛花蘭，開放式 Forged Turnbuckles, (Open Type) 供應商(1)
45	[德標] DIN 5299 (D) - 1980	彈簧鉤 D型 Snap Hook Round Wire and Forged - Form D 供應商(1)
46	[德標] DIN 5299 (E) - 1980	彈簧鉤 E型 Snap Hook Round Wire and Forged - Form E 供應商(1)
47	[德標] DIN 1478 - 1975	鋼管材或鋼棒材制套筒螺母 Turnbuckles Made from Steel Tube or Round Steel Bar 供應商(1)
48	[德標] DIN 1480 - 1975	花籃螺栓 Turnbuckles 供應商(1)
49	[德標] DIN 82101 - 2005	優質非合金鋼D形直卸扣 Components for Liftig, Towing, Lashing—Shackle, Dee-Non-Alloy Quality Steels
50	[德標] DIN 82103 - 2005	不銹鋼焊接直卸扣 (馬蹄形卸扣) Components for Liftig, Towing, Lashing - Shackle, Bow-stainless Steels
51	[德標] DIN 763 - 1990	不按量規檢驗的長環節圓鋼鏈 Tested, Non-calibrated, Long-link Round Steel Chains
52	[德標] DIN 6899 - 1988	套環 Steel Thimbles for Fibre Ropes
53	[德標] DIN 82103 - 1987	不銹鋼焊接直卸扣 (馬蹄形卸扣) Components for Liftig, Towing, lashing—Shackle, Bow-Stainless Steels
54	[德標] DIN 1142 - 1982	滿足安全要求的鋼絲繩卡頭 Wire Rope Grips for Rope Terminations; To Meet Safety Requirements
55	[德標] DIN 5299 (A) - 1980	彈簧鉤 A型 Snap Hook Half-round Wire - Form A
56	[德標] DIN 5299 (B) - 1980	彈簧鉤 B型 Snap Hook Round Wire and Forged - Form B
57	[德標] DIN 5299 (C) - 1980	彈簧鉤 C型 Snap Hook Round Wire and Forged - Form C
58	[德標] DIN 82101 - 1976	優質非合金鋼D形直卸扣 Components for Liftig, Towing, Lashing - Shackle, Dee-non-alloy Quality Steels
59	[德標] DIN 741 - 1972	電纜端部連接用鋼絲繩夾 Wire Rope Clamps for Cable End Connections
60	[德標] DIN 82004 - 1972	A型花籃 Turnbuckles - Form A
61	[德標] DIN 82004 - 1972	B型花籃 Turnbuckles - Form B
62	[德標] DIN 82004 - 1972	C型花籃 Turnbuckles - Form C
63	[德標] DIN 82004 - 1972	D型花籃 Turnbuckles - Form D
64	[德標] DIN 82004 - 1972	E型花籃 Turnbuckles - Form E
65	[德標] DIN 82004 - 1972	花籃套筒 Clamp Nut
66	[德標] DIN 48051-1 (SBM) - 1959	SBM 型鉤型絕緣子支柱 Overhead Lines Curved Insulator Supports - Standard Design - SBM
67	[德標] DIN 48051-1 - 1959	SBD 型鉤型絕緣子支柱 Overhead Lines Curved Insulator Supports - Standard Design - SBD
68	[國際] ISO 2415 (Dee) - 2022	一般起重用鍛造卸扣 - D形卸扣 Forged Shackles for General Lifting Purposes - Dee Shackles
69	[國際] ISO 2415 (Bow) - 2022	一般起重用 - 弓形卸扣 Forged Shackles for General Lifting Purposes - Bow Shackle
70	[國際] ISO 7597 - 2013	帶安全閉鎖裝置的8級鋼制鍛造起重吊鉤 Forged Steel Lifting Hooks with Latch, Grade 8
71	[日標] JIS B 2809 (MS) - 2018	MS型U型螺栓 U Shape Bolts (Type MS) 供應商(1)
72	[日標] JIS B 2809 (MS) - 1977	MS型U型螺栓 U Shape Bolts (Type MS) 供應商(1)
73	[日標] JIS B 2809 (MR) - 2018	MR型U型螺栓 U Shape Bolts (Type MR)
74	[日標] JIS B 2809 (F) - 2018	F型U型螺栓 U Shape Bolts (Type F)
75	[日標] JIS A 5540 - 2008	建筑用索具 Table A.3 Turnbuckle Building, Thread Strap Bolt, Carbon Steel and Hot-dip Zinc Coated Carbon Steel
76	[日標] JIS A 5540 - 2008	建筑用索具花籃 Table A.4 Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
77	[日標] JIS A 5540 - 2008	建筑用索具花籃 Table A.5 Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
78	[日標] JIS A 5540 - 2008	建筑用索具花籃 Table A.6 Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
79	[日標] JIS A 5540 - 2008	建筑用索具花籃不銹鋼 Table A.8 Stainless Steel Thread Strap Bolt
80	[日標] JIS A 5540 - 2008	建筑用索具花籃不銹鋼 Table A.9 Longer Stainless Steel Thread Strap Bolt
81	[日標] JIS A 5541 - 2008	建筑用花蘭主體 - 碳鋼制及熱浸鋅碳鋼制 Body of Turnbuckle for Building - Carbon Steel Products and Hot-dip Zinc Coated Carbon Steel Products
82	[日標] JIS A 5541 - 2008	建筑用花蘭主體 - 不銹鋼制 Body of Turnbuckle for Building - Stainless Steel Products
83	[日標] JIS A 5542 (1A) - 2003	建筑用花蘭螺桿 - 單孔長平頭螺桿 [碳鋼, 熱鍍鋅碳鋼制] Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
84	[日標] JIS A 5542 (1B) - 2003	建筑用花蘭螺桿 - 雙孔長平頭螺桿 [碳鋼, 熱鍍鋅碳鋼制] Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
85	[日標] JIS A 5542 (2A) - 2003	建筑用花蘭螺桿 - 吊環螺桿 [碳鋼制] Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
86	[日標] JIS A 5542 (2B) - 2003	建筑用花蘭螺桿 - 吊環螺桿 [碳鋼制] Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
87	[日標] JIS A 5542 (3) - 2003	建筑用花蘭螺桿 - 雙頭螺桿 [碳鋼制] Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products]
88	[日標] JIS A 5542 (4) - 2003	建筑用花蘭螺桿 - 不銹鋼長平頭螺桿 Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt
89	[日標] JIS A 5542 (A1A) - 2003	建筑用軋鋼制花蘭螺桿 - 單孔長平頭螺桿 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
90	[日標] JIS A 5542 (A1B) - 2003	建筑用軋鋼制花蘭螺桿 - 雙孔長平頭螺桿 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
91	[日標] JIS A 5542 (A2A) - 2003	建筑用軋鋼制花蘭螺桿 - 吊環螺桿 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
92	[日標] JIS A 5542 (A2B) - 2003	建筑用軋鋼制花蘭螺桿 - 吊環螺桿 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
93	[日標] JIS B 2801 - 1996	直形卸扣 SA、SB和SC型 Straight Shackle Body - Form SA, SB and SC
94	[日標] JIS B 2801 - 1996	卸扣 BD型 Shackle Body - Form BD
95	[日標] JIS B 2801 - 1996	卸扣 SD型 Shackle Body - Form SD
96	[日標] JIS B 2801 - 1996	卸扣 BA、BB和BC型 Bow Shackle Body - Form BA, BB and BC
97	[日標] JIS B 2809 (MR) - 1977	MR型U型螺栓 U Shape Bolts (Type MR)
98	[日標] JIS B 2809 (FS) - 1977	FS型U型螺栓 Wire Clip for Wire Strand, Type FS
99	[日標] JIS B 2809 (FR) - 1977	FR型U型螺栓 U Shape Bolts (Type FR)
100	[機械行業] JB /ZQ 4333 - 2006	螺旋扣 Turnbuckle

標準編號 / Standard Code： GB 559 (OE) - 1987
中文名稱 / Chinese Name： 圓形卸扣加大型
英文名稱 / English Name： Circular Shackle - Large
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page

Data Source: YJT Fastener Database (164580.com)
Standard: GB 559 (OE) - 1987
Chinese Name: 圓形卸扣加大型
English Name: Circular Shackle - Large
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.

圓形卸扣 加大型 GB 559 (OE) - 1987

同版本產品組

引用參考

圓形卸扣加大型 GB 559 (OE) - 1987