開槽球面扁圓柱頭機械螺釘 (ASTM F837,F468) [TABLE 2.2.8-1] ASME B 18.6.3 (H8A) - 2024
| 選擇規格尺寸 點擊↓ 0000# 000# 00# 0# 1# 2# 3# 4# 5# 6# 8# 10# 12# 1/4 5/16 3/8 |
尺寸單位:
inch
|
|
![美標ASME B18.6.3 (H8A) - 2024 ASME18.6.3 1 開槽球面扁圓柱頭機械螺釘 (ASTM F837,F468) [TABLE 2.2.8-1]](https://imgcc.164580.com/upload/48/pic/2023/11/23/1700723978556758230.jpg)
![ASME B 18.6.3 (H8A) - 2024 開槽球面扁圓柱頭機械螺釘 (ASTM F837,F468) [TABLE 2.2.8-1]](https://imgcc.164580.com/upload/48/qrcode_standardurl/24949.png)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,球面與圓錐側面之間應有清晰的分界。 ②,除非用戶有要求，開槽球面扁圓柱頭螺釘一般不要求清根。 ③,機械螺釘?shù)穆菁y長度： 1）螺紋規格≤5#: 公稱長度≤3倍公稱直徑的應為滿扣產品，頭下螺紋肩距≤1倍螺距。 公稱長度＞3倍公稱直徑到 1-1/8 in 的，允許頭下肩距最大不超過2倍螺距。 若無其他規定，長螺釘?shù)淖钚÷菁y長度為1 in 。 2）螺紋規格≥6#: 公稱長度≤3倍公稱直徑的應為滿扣產品，頭下螺紋肩距≤1倍螺距。 公稱長度＞3倍公稱直徑到 2 in 的，允許頭下螺紋肩距最大不超過2倍螺距。 若無其他規定，長螺釘最小螺紋長度為 1.5 in 。 ④,螺桿直徑ds應不小于2A級螺紋最小中徑，并不大于公稱（基本）螺紋大徑。 |
同版本產品組
長度公差
Machine screws can be made to any length, but they are generally produced in fractional length increments of 1/16 in. for screws up to 5/8 in. long, 1/8 in. for screws over 5/8 in. through 1-1/2 in. long, and 1/4 in. for screws over 1-1/2 in. long.
標稱螺釘尺寸的長度公差 | |||
標稱螺釘長度 | 螺紋規格 | ||
0000~00 | 0~12 | 1/4~3/4 | |
≤1/2 | -0.01 | -0.02 | -0.03 |
＞1/2,≤1 | -0.02 | -0.03 | -0.03 |
＞1,≤2 | / | -0.06 | -0.06 |
＞2 | / | -0.09 | -0.09 |
引用參考
注：技術數據僅供參考，請以官方原件為準！
類似標準及供貨信息
| 1 |
|
[國標] GB /T 65 - 2016 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws 供應商(5) |
| 2 |
|
[國標] GB /T 65 - 2000 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws 供應商(5) |
| 3 |
|
[國標] GB 65 - 1985 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws 供應商(5) |
| 4 |
|
[國標] GB 66 - 1976 |
開槽球面圓柱頭螺釘 Slotted Fillister Head Machine Screws |
| 5 |
|
[國標] GB /T 2268 - 1991 |
機床夾具零件及部件 鉆套螺釘 The Parts and Units of Jigs and Fixtures - Drill Sleeve Screw |
| 6 |
|
[國標] GB /T 2269 - 1991 |
機床夾具零件及部件 鏜套螺釘 The Parts and Units of Jigs and Fixtures - Boring Sleeve Screw |
| 7 |
|
[國標] GB 830 - 1988 |
開槽圓柱頭軸位螺釘 Slotted Cheese Head Screws with Shoulder |
| 8 |
|
[國標] GB /T 832 - 1988 |
開槽帶孔球面圓柱頭螺釘 Slotted Cap Stan Screws |
| 9 |
|
[國標] GB /T 833 - 1988 |
開槽大圓柱頭螺釘 Slotted Large Cheese Head Screws |
| 10 |
|
[國標] GB /T 946 - 1988 |
開槽球面圓柱頭軸位螺釘 Slotted Raised Cheese Head Screws with Shoulder |
| 11 |
|
[德標] DIN 84 - 1990 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws - Product Grade A 供應商(5) |
| 12 |
|
[德標] DIN 84 - 1970 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws 供應商(5) |
| 13 |
|
[德標] DIN 921 - 2014 |
開槽大盤頭螺釘 Slotted Pan Head Screws with Large Head 供應商(2) |
| 14 |
|
[德標] DIN 921 - 2007 |
開槽大盤頭螺釘 Slotted Pan Head Screws with Large Head 供應商(2) |
| 15 |
|
[德標] DIN 7964 (A) - 1990 |
粗牙不脫出螺栓和螺釘 - 開槽矮圓柱頭 Reduced Shanke Bolts and Screws with Coarse Thread - Slotted Cheese Head 供應商(2) |
| 16 |
|
[德標] DIN 921 - 1986 |
開槽大盤頭螺釘 Slotted Pan Head Screws with Large Head 供應商(2) |
| 17 |
|
[德標] DIN 920 - 2024 |
開槽小盤頭螺釘 Slotted Pan Head Screws with Small Head |
| 18 |
|
[德標] DIN 923 - 2024 |
開槽盤頭臺階螺釘 Slotted Pan Head Screws with Shoulder |
| 19 |
|
[德標] DIN 404 - 2017 |
開槽帶孔球面圓柱頭螺釘 Slotted Capstan Screws |
| 20 |
|
[德標] DIN 920 - 2012 |
開槽小盤頭螺釘 Slotted Pan Head Screws with Small Head |
| 21 |
|
[德標] DIN 923 - 2012 |
開槽盤頭臺階螺釘 Slotted Pan Head Screws with Shoulder |
| 22 |
|
[德標] DIN 404 - 2006 |
十字孔螺釘 Slotted Capstan Screws |
| 23 |
|
[德標] DIN 920 - 2006 |
開槽小盤頭螺釘 Slotted Pan Head Screws with Small Head |
| 24 |
|
[德標] DIN 923 - 2006 |
開槽盤頭臺階螺釘 Slotted Pan Head Screws with Shoulder |
| 25 |
|
[德標] DIN 404 - 1986 |
開槽帶孔球面圓柱頭螺釘 Slotted Capstan Screws |
| 26 |
|
[德標] DIN 920 - 1986 |
開槽小盤頭螺釘 Slotted Pan Head Screws with Small Head |
| 27 |
|
[德標] DIN 923 - 1986 |
開槽盤頭臺階螺釘 Slotted Pan Head Screws with Shoulder |
| 28 |
|
[德標] DIN 43854 - 1979 |
電表用鉛封螺栓 Sealing Bolts for Watthour Meters |
| 29 |
|
[德標] DIN 8243 - 1969 |
機械用開槽圓柱頭螺釘 Slotted Cheese Head Screws for Fine Mechanics |
| 30 |
|
[國際] ISO 1207 - 2011 |
開槽圓柱頭螺釘-產品等級A級 Slotted Cheese Head Screws - Product Grade A 供應商(1) |
| 31 |
|
[國際] ISO 1207 - 1992 |
開槽圓柱頭螺釘 A級 Slotted Cheese Head Screws - Product Grade A 供應商(1) |
| 32 |
|
[日標] JIS B 1101 (T3) - 2017 |
開槽矮圓柱頭螺釘 [表3] Slotted Cheese Head Screws [Table 3] 供應商(1) |
| 33 |
|
[日標] JIS B 1101 (AT1) - 1996 |
開槽矮圓柱頭螺釘 表1 [Attached Table 1] Slotted Cheese Head Screws [Attached Table 1] 供應商(1) |
| 34 |
|
[日標] JIS B 1101 (JA10) - 2017 |
開槽圓柱頭螺釘 附表JA.10 Slotted Fillister Head Screws - Table JA.10 |
| 35 |
|
[日標] JIS B 1101 (JA9) - 2017 |
開槽圓柱頭螺釘 附表JA.9 Slotted Flat Fillister Head Screws - Table JA.9 |
| 36 |
|
[日標] JIS B 1101 (JA7) - 2017 |
開槽扁圓柱頭螺釘 附表JA.7 Slotted Binding Head Screws - Table JA.7 |
| 37 |
|
[日標] JIS B 1116 (T6) - 2009 |
精密機械用開槽圓柱頭螺釘 Slotted Cheese Head Screws for Fine Mechanics |
| 38 |
|
[日標] JIS B 1101 (AAT7) - 1996 |
開槽圓柱頭螺釘 附表7 [Annex Attached Table 7] Slotted Flat Fillister Head Screws - Annex Attached Table 7 |
| 39 |
|
[日標] JIS B 1101 (AAT5) - 1996 |
開槽扁圓柱頭螺釘 附表5 [Annex Attached Table 5] Slotted Binding Head Screws [Annex Attached Table 5] |
| 40 |
|
[日標] JIS B 1101 (AAT8) - 1996 |
開槽矮圓柱頭螺釘 附表8 [Annex Attached Table 8] Slotted Fillister Head Screws [Annex Attached Table 8] |
| 41 |
|
[日標] JIS B 1119 (1CF) - 1986 |
眼鏡框架用 - 開槽平頭倒角螺釘 Spectacle Frames - Slotted Chamfered Flat Head Screws |
| 42 |
|
[日標] JIS B 1119 (1RF) - 1986 |
眼鏡框架用 - 開槽弧面平頭螺釘 Spectacle Frames - Slotted Round Flat Head Screws |
| 43 |
|
[日標] JIS B 1119 (1F) - 1986 |
眼鏡框架用 - 開槽平頭螺釘 Spectacle Frames - Slotted Flat Machine Screws |
| 44 |
|
[機械行業] JB /T 8045.5 - 1999 |
鉆套螺釘 Drill Sleeve Screw |
| 45 |
|
[機械行業] JB /T 8046.3 - 1999 |
鏜套螺釘 Boring Sleeve Screw |
| 46 |
|
[美標] ASME/ANSI B 18.6.3 (T21) - 2010 |
開槽球面圓柱頭螺釘Table21 Slotted Fillister Head Machine Screws |
| 47 |
|
[美標] ASME/ANSI B 18.6.3 - 2010 |
開槽球面圓柱頭頭部帶孔螺釘Table23 Slotted Drilled Fillister Head Screws (Machine screws only) |
| 48 |
|
[美標] ASME/ANSI B 18.6.3 - 2010 |
開槽球面圓柱頭螺釘Table27 Slotted Binding Head Screws (Machine screws only) |
| 49 |
|
[美標] ASME/ANSI B 18.6.2 (T3) - 1998 (R2010) |
開槽球面圓柱頭螺釘 [Table 3] (A307, SAE J429, F468, F593) Slotted [Table 3] (A307, SAE J429, F468, F593) |
| 50 |
|
[美標] ASME/ANSI B 18.11 - 1961 (R1983) |
開槽圓柱頭/球面圓柱頭小螺釘 [Table 1] Slotted Fillister Head Miniature Screws |
| 51 |
|
[意大利] UNI 6422 - 1969 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws for Manufacture of Railway and Tramway Rolling Stock - ISO Metric Coarse |
| 52 |
|
[意大利] UNI 6107 - 1967 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws - ISO Metric Thread - Finish A |
| 53 |
|
[法國] NF E 25-127 - 1994 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws - Product Grade A |
| 54 |
|
[法國] NF F 03-005 (C) - 1983 |
鐵路車輛 圓柱頭側切口機械螺釘 Railway Rolling Stock Grade A Notched Cheese Head Machine Screws |
| 55 |
|
[法國] NF E 27-169 - 1972 |
開槽盤頭臺階螺釘 Slotted Pan Head Screws with Shoulder |
| 56 |
|
[英標] BS 1981 - 1991 |
開槽球面圓柱頭螺釘Table14 Slotted Raised Cheese Head Screws |
| 57 |
|
[英標] BS 4183 (T5) - 1967 |
開槽圓柱頭機械螺釘 Slotted Cheese Head Machine Screws. Metric Series |
| 58 |
|
[英標] BS 450 - 1958 |
英制開槽圓柱頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 6] Slotted Cheese Head Screws with B.S.W. & B.S.F. Threads [Table 6] |
| 59 |
|
[澳標] AS /NZS 1427 - 1996 |
米制開槽圓柱頭螺釘 [Table 4] ISO Metric Slotted Cheese Head Screws [Table 4] |
| 60 |
|
[臺灣] CNS 9668 - 1988 |
開槽扁圓頂柱頭小螺釘 Slotted (Oval) Fillister Head Machine Screws |
| 61 |
|
[臺灣] CNS 9670 - 1988 |
開槽圓柱頭螺釘 Slotted Flat Fillister Head Machine Screws |
| 62 |
|
[臺灣] CNS 9680 - 1982 |
精密機械用開槽圓柱頭螺釘 Slotted Cheese Head Screws for Fine Mechanics |
| 63 |
|
[臺灣] CNS 4251 - 1980 |
開槽帶孔圓柱頭螺釘 Slotted Cheese Head Screw Head Hole |
| 64 |
|
[臺灣] CNS 4355 - 1980 |
開槽矮圓柱頭螺釘 Slotted Cheese Head Screws |
| 65 |
|
[臺灣] CNS 4356 - 1980 |
開槽大盤頭螺釘 Slotted Pan Head Screws with Large Head |
| 66 |
|
[臺灣] CNS 4358 - 1980 |
開槽圓柱頭軸位螺釘 Slotted Cheese Head Screws with Shoulder |
| 67 |
|
[臺灣] CNS 4360 - 1980 |
開槽小圓柱頭螺釘 Slotted Cheese Head Screw with Small Head |
| 68 |
|
[臺灣] CNS 4362 - 1980 |
精密用開槽圓柱頭螺釘 Slotted Cheese Head Screws for Fine Mechanics |
| 69 |
|
[俄標] GOST 1491 - 1980 |
開槽圓柱頭螺釘 A級 B級 Screws with Cylindrical Cap of Accuracy Classes A and B |
| 70 |
|
[韓標] KS B 1021 (T3) - 2012 (R2022) |
開槽圓柱頭螺釘 [Table 3] Slotted Cheese Head Screws [Table 3] |
| 71 |
|
[韓標] KS B 1021 - 1998 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws |
| 72 |
|
[標準] YJT 4011 |
塑料開槽圓柱頭滾花螺釘 Plastic Slotted Cheese Head Knurl Screws |
| 73 |
|
[標準] YJT 4017 |
塑料開槽大圓柱頭臺階螺釘 Plastic Slotted Large Cheese Head Screws with Shoulder |
| 74 |
|
[標準] YJT 4018 |
塑料一字槽圓柱頭帶墊螺釘 Plastic Slot(-) Cheese Head Screws with Collar |
| 75 |
|
[德標] DIN EN ISO 1207 - 2011 |
開槽圓柱頭螺釘-產品等級A級 Slotted Cheese Head Screws—Product Grade A 供應商(5) |
| 76 |
|
[德標] DIN EN ISO 1207 - 1994 |
開槽圓柱頭螺釘-產品等級A級 Slotted Cheese Head Screws - Product Grade A 供應商(5) |
| 77 |
|
[軍標] GJB 3371 (/33~/39) - 1998 |
圓柱頭螺栓 Cheese Head Bolts |
| 78 |
|
[軍標] GJB 3371 (/40~/44) - 1998 |
頭部帶保險孔的圓柱頭螺栓 Cheese Head Bolts with Wire Holes on Head |
| 79 |
|
[軍標] GJB 3372 (/11~/17) - 1998 |
圓柱頭螺釘 開槽 Cheese Head Screws, Slotted |
| 80 |
|
[軍標] GJB 3372 (/18~/24) - 1998 |
頭部帶保險孔的圓柱頭螺釘 Cheese Head Screws with Wire Holes on Head |
| 81 |
|
[軍標] GJB 3372 (/54~/55) - 1998 |
頭部帶保險孔的不脫出圓柱頭螺釘 Cheese Head Screws with Wire Holes on Head, Waisted Shank |
| 82 |
|
[軍標] GJB 3372 (/57~/59) - 1998 |
固定表盤螺釘 Slotted Fillister Head Machine Screws |
| 83 |
|
[印標] IS 1366 - 2002 |
開槽圓柱頭螺釘 A級 Slotted Cheese Head Screws - Product Grade A |
| 84 |
|
[美標] ANSI B 18.11 - 1961 (R2017) |
開槽圓柱頭/球面圓柱頭小螺釘 [Table 1] (A276, B16, B151) Slotted Fillister Head Miniature Screws [Table 1] (A276, B16, B151) |
| 85 |
|
[美標] ANSI B 18.11 - 1961 (R2017) |
開槽聯頭（扁圓柱頭）小螺釘 [Table 4] (A276, B16, B151) Slotted Binding Head Miniature Screws [Table 4] (A276, B16, B151) |
| 86 |
|
[美標] ASME B 18.6.3 (H6A) - 2024 |
開槽球面圓柱頭螺釘 (ASTM F837, F468) [TABLE 2.2.6-1] Slotted Fillister Head Screws (ASTM F837, F468) [TABLE 2.2.6-1] |
| 87 |
|
[美標] ASME B 18.6.3 (H6C) - 2024 |
球面圓柱頭,頭部帶孔螺釘 (ASTM F837, F468) [TABLE 2.2.6-3] Slotted Drilled Fillister Head Screws (Machine Screws Only) (ASTM F837, F468) [TABLE 2.2.6-3] |
| 88 |
|
[美標] ASME B 18.6.3 (T21) - 2013 |
開槽球面圓柱頭螺釘 [Table 21] (ASTM F837, F468) Slotted Fillist Head Screws [Table 21] (ASTM F837, F468) |
| 89 |
|
[美標] ASME B 18.6.3 (T23) - 2013 |
球面圓柱頭,頭部帶孔螺釘 [Table 23] (ASTM F837, F468) Slotted Drilled Fillister Head Screws (Machine Screws Only) [Table 23] (ASTM F837, F468) |
| 90 |
![開槽球面扁圓柱頭機械螺釘[Table 27] (ASTM F837, F468)](https://imgccc.164580.com/upload/48/pic/2023/11/23/1700723978920217507.jpg)
|
[美標] ASME B 18.6.3 (T27) - 2013 |
開槽球面扁圓柱頭機械螺釘[Table 27] (ASTM F837, F468) Dimensions of Slotted Binding Head Screws (Machine Screws Only) (ASTM F837, F468) |
| 91 |
|
[航天] QJ 2368 - 1992 |
開槽帶孔圓柱頭螺釘 Slotted Cheese Head Screws with Holes |
| 92 |
|
[航天] QJ 2371 - 1992 |
開槽圓柱頭螺釘 Slotted Cheese Head Screws |
| 93 |
|
[航天] QJ 2382 - 1992 |
開槽球面圓柱頭軸位螺釘 Slotted Raised Cheese Head Screws with Shoulder |
| 94 |
|
[航天] QJ 2383 - 1992 |
開槽球面大圓柱頭螺釘 Slotted Large Raised Cheese Head Screws |
| 95 |
|
[航天] QJ 2385 - 1992 |
開槽帶孔圓柱頭螺釘 Slotted Cheese Head Screws with Holes |
| 96 |
|
[航空] HB 1- 127 - 2002 |
頭部帶保險孔的圓柱頭螺栓 Cheese Head Bolts with Wire Holes on Head |
| 97 |
|
[航空] HB 1- 203 - 2002 |
頭部帶保險孔的圓柱頭螺釘 Cheese Head Screws with Wire Holes on Head |
| 98 |
|
[航空] HB 1- 202 - 1995 |
圓柱頭螺釘 Slotted Cheese Head Screws |
標準編號 / Standard Code：
ASME B 18.6.3 (H8A) - 2024
中文名稱 / Chinese Name： 開槽球面扁圓柱頭機械螺釘 (ASTM F837,F468) [TABLE 2.2.8-1]
英文名稱 / English Name： Slotted Binding Head Screws (ASTM F837,F468) [TABLE 2.2.8-1]
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
中文名稱 / Chinese Name： 開槽球面扁圓柱頭機械螺釘 (ASTM F837,F468) [TABLE 2.2.8-1]
英文名稱 / English Name： Slotted Binding Head Screws (ASTM F837,F468) [TABLE 2.2.8-1]
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
Data Source:
YJT Fastener Database (164580.com)
Standard: ASME B 18.6.3 (H8A) - 2024
Chinese Name: 開槽球面扁圓柱頭機械螺釘 (ASTM F837,F468) [TABLE 2.2.8-1]
English Name: Slotted Binding Head Screws (ASTM F837,F468) [TABLE 2.2.8-1]
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
Standard: ASME B 18.6.3 (H8A) - 2024
Chinese Name: 開槽球面扁圓柱頭機械螺釘 (ASTM F837,F468) [TABLE 2.2.8-1]
English Name: Slotted Binding Head Screws (ASTM F837,F468) [TABLE 2.2.8-1]
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
© 易緊通 服務熱線：4006-164580（免長途費）