精密100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-5] ASME B 18.6.3 (H1E) - 2024
![美標ASME B18.6.3 (H1E) - 2024 ASME18.6.3 1 精密100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-5]](https://imgcc.164580.com/upload/48/pic/2023/12/08/1702011684598208551.jpg)
![ASME B 18.6.3 (H1E) - 2024 精密100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-5]](https://imgcc.164580.com/upload/48/qrcode_standardurl/24913.png)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,頭部邊緣為倒圓或平的。 ②,光桿直徑應不小于2A級螺紋最小中徑，且不大于公稱（基本）螺紋大徑。 ③,機械螺釘的螺紋長度： 1）螺紋規格≤5#: 公稱長度≤3倍公稱直徑的應為滿扣產品，頭下螺紋肩距≤1倍螺距。 公稱長度＞3倍公稱直徑到 1-1/8 in 的，允許頭下肩距最大不超過2倍螺距。 若無其他規定，長螺釘的最小螺紋長度為1 in 。 2）螺紋規格≥6#: 公稱長度≤3倍公稱直徑的應為滿扣產品，頭下螺紋肩距≤1倍螺距。 公稱長度＞3倍公稱直徑到 2 in 的，允許頭下螺紋肩距最大不超過2倍螺距。 若無其他規定，長螺釘的最小螺紋長度為 1.5 in 。 |
同版本產品組
長度公差
Machine screws can be made to any length, but they are generally produced in fractional length increments of 1/16 in. for screws up to 5/8 in. long, 1/8 in. for screws over 5/8 in. through 1-1/2 in. long, and 1/4 in. for screws over 1-1/2 in. long.
標稱螺釘尺寸的長度公差 | |||
標稱螺釘長度 | 螺紋規格 | ||
0000~00 | 0~12 | 1/4~3/4 | |
≤1/2 | -0.01 | -0.02 | -0.03 |
＞1/2,≤1 | -0.02 | -0.03 | -0.03 |
＞1,≤2 | / | -0.06 | -0.06 |
＞2 | / | -0.09 | -0.09 |
引用參考
注：技術數據僅供參考，請以官方原件為準！
類似標準及供貨信息
| 1 |
|
[國標] GB /T 68 - 2016 |
開槽沉頭螺釘 Slotted Countersunk Flat Head Screws 供應商(6) |
| 2 |
|
[國標] GB /T 68 - 2000 |
開槽沉頭螺釘 Slotted Countersunk Head Screws (Commen Head Style) 供應商(6) |
| 3 |
|
[國標] GB 68 - 1985 |
開槽沉頭螺釘 Slotted Countersunk Head Screws 供應商(6) |
| 4 |
|
[國標] GB 948 - 1988 |
開槽沉頭不脫出螺釘 Slotted Countersunk Head Screws with Waisted Shank |
| 5 |
|
[美標] IFI 513 - 1982 |
米制開槽沉頭機械螺釘 Table 2 Metric Slotted Flat Countersunk Head Machine Screws |
| 6 |
|
[德標] DIN 963 - 1990 |
開槽沉頭螺釘 Slotted Countersunk Head Screws 供應商(4) |
| 7 |
|
[德標] DIN 7969 - 2017 |
鋼結構用帶六角螺母的開槽沉頭螺栓 Slotted Countersunk Head Bolts with Hexagon Nut for Steel Structures |
| 8 |
|
[德標] DIN 7969 - 1989 |
鋼結構用帶六角螺母的開槽沉頭螺栓 Slotted Countersunk Head Screws for Structural Steel Bolting for Supply with or Without Nuts |
| 9 |
|
[德標] DIN 8245 - 1972 |
開槽沉頭（平頭）螺釘 - 適用于精密機械；M0.4至M1.4 Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4 |
| 10 |
|
[國際] ISO 2009 - 2011 |
開槽沉頭螺釘（通用頭型） - 產品等級A級 Slotted Countersunk Flat Head Screws (Common Head Style) - Product Grade A |
| 11 |
|
[國際] ISO 2009 - 1994 |
開槽沉頭螺釘（通用頭型） - 產品等級A級 Slotted Countersunk Flat Head Screws (common Head Style) - Product Grade A |
| 12 |
|
[日標] JIS B 1116 (T4) - 2009 |
精密機械用開槽沉頭螺釘 Slotting Countersunk Head Screws for Fine Mechanics 供應商(1) |
| 13 |
|
[日標] JIS B 1101 (T8) - 2017 |
開槽沉頭螺釘 表8 Slotted Countersunk Head Screws - Table 8 |
| 14 |
|
[日標] JIS B 1101 (JA4) - 2017 |
開槽沉頭螺釘 附表JA.4 Slotted Countersunk Head Screws - Table JA.4 |
| 15 |
|
[日標] JIS B 1101 (AAT2) - 1996 |
開槽沉頭螺釘 附表2 [Annex Attached Table 2] Slotted Countersunk Head Screws [Annex Attached Table 2] |
| 16 |
|
[日標] JIS B 1101 (AT3) - 1996 |
開槽沉頭螺釘 表3 [Attached Table 3] Slotted Countersunk Head Screws [Attached Table 3] |
| 17 |
|
[日標] JIS B 1179 (T1-1) - 1994 |
開槽沉頭螺栓 (精制) [Table 1-1] Slotted Flat Head Bolts, Fine Finished [Table 1-1] |
| 18 |
|
[日標] JIS B 1179 (T1-2) - 1994 |
開槽沉頭螺栓 (粗制）[Table 1-2] Slotted Flat Head Bolts, Rough Finished [Table 1-2] |
| 19 |
|
[美標] ASME/ANSI B 18.6.3 - 2010 |
80°開槽沉頭螺釘Table1 80° Slotted Flat Countersunk Head Machine Screws |
| 20 |
|
[美標] ASME/ANSI B 18.6.3 - 2010 |
100°開槽沉頭螺釘Table3 Slotted 100 Deg Flat Countersunk Head Screws (Machine screws only) |
| 21 |
|
[美標] ASME/ANSI B 18.6.3 - 2010 |
緊公差100°開槽沉頭螺釘Table5 Close Tolerance 100 Degree Slotted Countersunk Head Screws |
| 22 |
|
[美標] ASME/ANSI B 18.6.3 - 2010 |
80°開槽沉頭清根螺釘Table9 80° Slotted Undercut 82-deg Flat Countersunk Head Machine Screws |
| 23 |
|
[美標] ASME/ANSI B 18.6.2 (T1) - 1998 (R2010) |
開槽沉頭螺釘 [Table 1] (A307, SAE J429, F468, F593) Slotted Flat Countersunk Head Cap Screws [Table 1] (A307, SAE J429, F468, F593) |
| 24 |
|
[美標] ASME/ANSI B 18.6.7M - 1998 |
米制開槽沉頭螺釘Table2 Metric Soltted Countersunk Screws |
| 25 |
![開槽100°沉頭小螺釘 [Table 3]](https://imgccc.164580.com/upload/48/standard/2015/04/28/1430186255800189302.jpg)
|
[美標] ASME/ANSI B 18.11 - 1961 (R1983) |
開槽100°沉頭小螺釘 [Table 3] Slotted 100° Flat Head Miniature Screws |
| 26 |
|
[意大利] UNI 6109 |
開槽沉頭螺釘 Slotted Countersunk Flat Head Screws |
| 27 |
|
[法國] NF E 25-123 - 1994 |
開槽沉頭螺釘 Slotted Countersunk Flat Head Screws - Product Grade A |
| 28 |
|
[法國] NF F 03-004 (F) - 1983 |
鐵路車輛 沉頭側切口機械螺釘 Railway Rolling Stock Grade A Countersunk Notched Head Machine |
| 29 |
|
[法國] NF F 03-016 - 1983 |
鐵路車輛 開槽沉頭螺釘/螺母 A級 符號FP Railway Rolling Stock Grade A Slotted Countersunk Head Screws Nuts Symbol FP |
| 30 |
|
[英標] BS 1981 - 1991 |
開槽沉頭螺釘（短的）Table 6 Slotted Truncated Countersunk Head Screws: Short Length |
| 31 |
|
[英標] BS 1981 - 1991 |
開槽沉頭螺釘Table4 Slotted Countersunk Flat Head Screws |
| 32 |
|
[英標] BS 4183 (T2) - 1967 |
開槽沉頭機械螺釘 Slotted Countersunk Head Machine Screws. Metric Series |
| 33 |
|
[英標] BS 450 - 1958 |
英制開槽沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 2] Slotted 90°Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 2] |
| 34 |
|
[澳標] AS /NZS 1427 - 1996 |
米制開槽沉頭螺釘 [Table 1] ISO Metric Slotted Countersunk Head Screws [Table 1] |
| 35 |
|
[臺灣] CNS 9678 - 1982 |
精密機械用開槽沉頭螺釘 Slotted Countersunk Screws for Fine Mechanics |
| 36 |
|
[臺灣] CNS 4411 - 1981 |
開槽沉頭螺釘 Slotted Countersunk Head Screws |
| 37 |
|
[臺灣] CNS 4413 - 1981 |
電開關用開槽圓柱沉頭螺釘 Slotted Cheese Head Screws for Electric Switch |
| 38 |
|
[臺灣] CNS 4420 - 1981 |
開槽沉頭螺栓 Countersunk Head Bolts with Forged Slot for Steel Structures |
| 39 |
|
[臺灣] CNS 4363 - 1980 |
精密用開槽沉頭螺釘 M0.4～M1.4 Slotted Countersunk Head Screws for Fine Mechanics |
| 40 |
|
[俄標] GOST 17475 - 1980 |
開槽沉頭螺釘 A級和B級 Countersunk Head Screws of Accuracy Classes A and B（Slotted） |
| 41 |
|
[韓標] KS B 1021 (T5) - 2012 (R2022) |
開槽沉頭螺釘 [Table 5] Slotted Countersunk Flat Head Screws [Table 5] |
| 42 |
|
[德標] DIN EN ISO 2009 - 2011 |
開槽沉頭螺釘(通用頭型) A級 Slotted Countersunk Flat Head Screws(Common Head Style)-Product Grade A 供應商(4) |
| 43 |
|
[軍標] GJB 3371 (/61) - 1998 |
光桿公差帶f9 100°沉頭螺栓 100° Countersunk Head Bolts，Shank Tolerance f9 |
| 44 |
|
[軍標] GJB 3372 (/36~/44) - 1998 |
100°開槽沉頭螺釘 Slotted 100 Deg Flat Countersunk Head Screws |
| 45 |
|
[軍標] GJB 3372 (/56) - 1998 |
100°沉頭不脫出螺釘 Slotted 100 Deg Flat Countersunk Head Screws, Waisted Shank |
| 46 |
|
[印標] IS 1365 - 2005 |
開槽沉頭螺釘（通用頭型） - 產品等級A級 Slotted Countersunk Flat Head Screws (Common Head Style) - Product Grade A |
| 47 |
![開槽100°沉頭小螺釘 [Table 3] (A276, B16, B151)](https://imgccc.164580.com/upload/48/standard/2018/11/15/f2_1542258304.jpg)
|
[美標] ANSI B 18.11 - 1961 (R2017) |
開槽100°沉頭小螺釘 [Table 3] (A276, B16, B151) Slotted 100°Flat Head Miniature Screws [Table 3] (A276, B16, B151) |
| 48 |
|
[美標] ASME B 18.6.3 (H1A) - 2024 |
82°開槽沉頭機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-1] 82° Slotted Flat Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.1-1] |
| 49 |
|
[美標] ASME B 18.6.3 (H1C) - 2024 |
100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-3] Slotted 100-deg Flat Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-3] |
| 50 |
|
[美標] ASME B 18.6.3 (H3A) - 2024 |
開槽82°沉頭清根機械螺釘 (ASTM F837/F468) [TABLE 2.2.3-1] Slotted Undercut 82-deg Flat Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.3-1] |
| 51 |
|
[美標] ASME B 18.6.3 (T1) - 2013 |
82°開槽沉頭機械螺釘 [Table 1] (ASTM F837 / F468) 82° Slotted Flat Countersunk Head Machine Screws [Table 1] (ASTM F837 / F468) |
| 52 |
|
[美標] ASME B 18.6.3 (T3) - 2013 |
100°沉頭開槽機械螺釘 [Table 3] (ASTM F837 / F468) Slotted 100-deg Flat Countersunk Head Screws [Table 3] (ASTM F837 / F468) |
| 53 |
|
[美標] ASME B 18.6.3 (T5) - 2013 |
開槽精密100°沉頭機械螺釘 [Table 5] (ASTM F837 / F468) Slotted Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only) (ASTM F837 / F468) |
| 54 |
|
[美標] ASME B 18.6.3 (T9) - 2013 |
開槽82°沉頭清根機械螺釘 [ Table 9 ] (ASTM F837 / F468) Slotted Undercut 82-deg Flat Countersunk Head Machine Screws (ASTM F837 / F468) |
| 55 |
|
[航天] QJ 2370 - 1992 |
開槽沉頭螺栓 Slotted Countersunk Head Screws |
| 56 |
|
[航天] QJ 2373 - 1992 |
開槽沉頭螺釘 Slotted Countersunk Head Screws |
| 57 |
|
[航空] HB 7187~7195 - 1995 |
100°開槽沉頭螺釘 100° Countersunk Head Bolts |
| 58 |
|
[航空] HB 7208~7216 - 1995 |
100°開槽沉頭螺釘 Slotted 100 Deg Flat Countersunk Head Screws |
標準編號 / Standard Code：
ASME B 18.6.3 (H1E) - 2024
中文名稱 / Chinese Name： 精密100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-5]
英文名稱 / English Name： Slotted Close Tolerance 100-deg Flat Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-5]
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
中文名稱 / Chinese Name： 精密100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-5]
英文名稱 / English Name： Slotted Close Tolerance 100-deg Flat Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-5]
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page
Data Source:
YJT Fastener Database (164580.com)
Standard: ASME B 18.6.3 (H1E) - 2024
Chinese Name: 精密100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-5]
English Name: Slotted Close Tolerance 100-deg Flat Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-5]
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
Standard: ASME B 18.6.3 (H1E) - 2024
Chinese Name: 精密100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-5]
English Name: Slotted Close Tolerance 100-deg Flat Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-5]
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.
© 易緊通 服務熱線：4006-164580（免長途費）